The Cornwell MMWMP143i is an Inverter-Powered wire feed welder for Flux Core, MIG, DC STICK (Optional Purchase- MMW105200087) and DC TIG.(Optional Purchase- MMWACTT1) It uses Leading edge Inverter Technology to provide high quality welds that are crisp, clean and consistent with plenty of power. The Cornwell MMWMP143i comes complete with a Regulator and gas hose Mig Gun and Ground Cable with Clamp. This unit is intended to be used on a 120v 20A AC circuit without the use of an extension cord. If extension cord is necessary for your application, use the appropriate size and length of extension cord that will handle 20 amps the entire length of the extension cord. We highly recommend talking with a qualified electrician for correct cord size recommendations.
This unit is supplied with a NEMA Class 120v plug. DO NOT REMOVE
THE POWER PLUG
Specs:
MIG and Flux Core Wire Feed Welder
Input Power: 120V, 13.5A, 50/60 Hz
No Load Voltage: 62V
Welding Current: MIG: 30～140A, STICK: 30～75A, TIG: 25～110A
Duty Cycle: MIG: 30%, STICK: 40%, TIG: 20%
Dimensions (L x W x H): 18.70" X 9.44" X 14.76"
Weight: 26.45 lbs
Comes complete with:
DC Inverter MIG Welder
MIG gun (integrated)
Grounding cable with clamp
Operator’s Manual
Replacement Parts:
MMW023 - MIG Contact Tip .023 (5pk)
MMW030 - MIG Contact Tip .030 (5pk)
MMW035 - MIG Contact Tip .035 (5pk)
MMWFC - MIG Flux Nozzle
MMWMN - MIG Nozzle
Options:
MMW105200087 - DC Stick Welding Assembly
MMW ACTT1 - TIG Torch Assembly
