CORNWELL MMWFC135I 120-volt input, 130-amp DC output flux core-only wire feed welders are economical and easy to use. It requires no shielding gas and welds 8 gauge to 3/16" mild steel materials with .030" or .035" flux core wires on 4" or 8" spools. This unit features a dialed voltage range, a setup chart, a cooling fan, trigger activated arc, overload protection, an 8-1/2 ft torch with Tweco style series 11 replacement parts, and 6 ft ground cable and clamp. The MMWFC135I is ideal for use when welding mild steel 18 gauge to 3/16” for light industrial applications (FOR USE WITH FLUX CORE WIRE ONLY)
Specs:
INVERTER FLUX CORE WIRE FEED WELDER
120V, 20A 50/60 HZ Single Phase Input Power
Open Circuit Voltage 42 VDC
50 to 125A Output, Peak 130A DC
Duty Cycle: 30 % @ 90A
Weight 25lbs
It requires no shielding gas
It uses Flux Core Wire
Welds steel, cast iron, and hard surfacing materials.
Welds thicknesses from 8 gauge to 3/16"
Uses 0.030" or 0.035" Flux Core wire.
Can accept 4" or 8" Spools of Wire.
Comes complete with:
8-1/2' Torch
6' Ground Cable and Clamp
Tweco style 11consumables
Owners Manual
Replacement Parts:
Options:
Replacement Parts:
